MTCONNECTIVITY

Make the change

    • Make the change

    • SCHMIDT® TorquePress 520

    for use in the medium force range, e.g. in the following industries:

    • Automotive 
    • Domestic and building services engineering 
    • Medical technology, pharmacy 

    Complementary to the ServoPress series, the SCHMIDT® TorquePress 

    is characterized by a number of special features. Among other things, a hollow-shaft torque motor is used, which enables very high pressing forces with very high motor torque without additional mechanical ratios.

    Noise levels also remain remarkably low at all load conditions compared to other electric presses. The spindle nut, which is driven directly without the use of additional gears, enables very high efficiencies. Thanks to the hollow-shaft motor, the TorquePress is particularly compact and allows short overall lengths.

    If you are interested, please contact Schmidt Technology directly. Inquire here. 

    Features

    Process control behavior

    • Displacement measurement takes place directly at the slide, resulting in extremely high positioning and repeat accuracy.
    • Absolute displacement measuring system, thus no reference run is necessary.
    • High-precision press force detection through direct force introduction into the sensor system.

    Real-time evaluation

    • immediate reaction to process and quality data
    • no delay due to slow process data transfer
    • immediate availability of SPC data.

    Intelligent compensation

    • by offsetting individual tolerances of the parts
    • of system elasticities (deflection compensation)

    Precise and robust mechanical design

    • directly driven spindle nut, no additional gearbox
    • integrated automatic spindle lubrication system,
    • full load capacity over the complete ram stroke

    System immediately ready for operation

    • Standard travel profiles require only the input of position and speed
    • System parameterizes itself automatically.

    Technical data

    Press type TorquePress 520
    Force F max.S3 25% 20 sec 20 kN
    Force F 100% ED 10 kN
    Ram stroke 250 mm
    Drive control resolution <0.1 µm
    Ram speed (max.) 260 mm/s
    Drive Ball screw
    Motor / nut ratio 1/1
    Protection class IP50
    weight approx. 95 kg
    max. tool weight 25 kg
    tool dimensions WxD 300 mmx 230mm
    Mains connection automation component 3 x 400 to 480 V AC / 50 - 60 Hz max. back-up fuse 16 A
    power at nominal load 5kW
    Back
    to
    Overview